Well after a little problem with the E-Fair, I’ve put the FPV equipment on the Minimoa glider and took it up for a bit of a test today
Apart from the wind which at various points took the glider most noticeably at the start of final approach and just before touchdown, I think I had the camera mounted pointing a little too much down, although I thought through the goggles I was flying quite level I was flying with a lot of up elevator and was told the glider looked very tail heavy.
Secondly EPP foam seems to block GPS signals much more that I expected it to, since it never acquired a GPS lock. I was hoping to check the home position and test the point to home functionality of the CL-OSD update which I flashed to my mini-osd unit, but since a GPS lock was never acquired the home position could not be set.
Also the 5.8Ghz transmitter antenna was fully enclosed in the plane. Again EPP must interfere with 5.8Ghz a reasonable amount since I wasn’t anywhere near as far away as I was with the E-Fair (with the antenna poking out under the wing) and the signal was breaking up far more.
So in future, the FPV antenna should be outside the fuselage of the plane, as should the GPS receiver unit (at very least to obtain an initial GPS lock), and I need to check the horizon position on the screen when the plane is level on the ground.